Zadnji nabavljeni komad opreme

[bhgr1]

RE: Zadnji nabavljeni komad opreme

This post was last modified: 31.07.2017, 09:50 by bhgr1.

Pa ako je pouzdana racunica onda ok. Znam da neki ljudi i tako koriste, ipak ja vise vjerujem u manometar sa barima. Sta sada, ako nisi mogao nabaviti orginalni posluzice i to.

Ono sto sam nasao na ovu temu je na:

http://www.homebrewtalk.com/showpost.php...stcount=18

the gauge is mislabeled. A gauge cannot measure flow- it has a spring in it which reacts to pressure, not volume- a flow meter is entirely different. Psi is pressure, flow rate is dependent on the psi you are dispensing at, atmospheric pressure, hose size, tank volume- all those things. If you want to know cfm, liters per minute- any rate of volume per time- you need a flow meter. Or you can do what i did, as suggested to me to me aj delange. http://www.homebrewtalk.com/f128/flow-rate-o2-293744/ Take a two liter bottle of water and fill it with two liters of water and hold it upside down in a bucket of water so the water stays in. stick your hose up into the water and turn your gas on and time how long it takes for the gas to displace the 2 l of water in the bottle. This will give you a rough idea of your flow- but it is not exact, since the next time you measure you will have less gas in your tank. you will be in the ballpark, even though the settings on your regulator may not change. That is why there is no conversion, and why that gauge is definitely not measuring volume per time.

Ovaj regulator koji sam kupio je nov, iz firme koja se bavi dustrribucijom gasova, made in EU, pa kontam uganjacu ga nekako....
Da kupim nesto na pik-u ili od kineza nit' imam garancije niti bilo kakve pomoci. Od ovih lokalnih likova to ipak mogu dobiti ako nesto ne bude islo kako treba.